2x2 DVI over Cat5 / Cat6 Matrix Splitter Switch, Video Transmitter, Up to 60.96 m (200-ft.)

Tripp Lite's B140-202, 2X2 DVI Matrix Switch allows two DVI Single-Link video sources to be routed to one or two RJ45 outputs and extended up to 45.72 m (150-ft.) @ 1920x1200 using Active (powered) Receiver, or up to 15.24 m (50-ft.) @ 1920x1200 using Passive (non-powered) Rec. Switching between sources is done manually or with included remote control. Additional monitors can be added beyond the typical two by using Tripp Lite B140-110 daisy-chain Receivers - up to 4 monitors per channel.

- Share two DVI sources between two monitors
- Supports DVI Single Link computer resolutions up to 1920 x 1200 @ 60Hz
- Transmits over inexpensive Cat5e/6 cable up to 60.96 m (200-ft.)
- Plug-and-Play

- Share two DVI video sources between two monitors
- Supports DVI Single Link computer resolutions up to 1920 x 1200 @ 60Hz
- Allows either input to be routed to either output, or the one input signal to both outputs
- Transmits over a single Cat5e/6 cable to a remote monitor up to 60.96 m (200-ft.) away
- HDCP and EDID compliant
- Plug-and-Play
- A B140-Series remote receiver is needed at each monitor
- Active (powered) and Passive (non-powered) Receivers available
- Use 24AWG Solid Wire Cat5e/6 patch for maximum video performance
- Further expand the range and number of monitors with B140-110 Daisy-Chain Repeaters
- International AC Adapter B110-INT required for use with UK, European, and Australian power connections

Tripp Lite B140-202, DVI, Black, 1200 x 1920, Cat5e, Cat6, 127 mm, 99.1 mm

Tripp Lite B140-202. Video port type: DVI. Product color: Black, Supported graphics resolutions: 1200 x 1920. Cable types supported: Cat5e, Cat6. Width: 127 mm, Depth: 99.1 mm, Height: 30.5 mm. Package width: 63.5 mm, Package depth: 210.8 mm, Package height: 160 mm